How do I replace the serpentine belt on an Audi 80?

I noticed some squealing noises coming from my engine and upon inspection, I found that my serpentine belt needs to be replaced. How do I go about replacing it on an Audi 80?

Hi Jack, first you'll need to park your Audi 80 on a level surface and disconnect the negative battery cable. Then, you'll need to locate the tensioner pulley and use a wrench to rotate it and relieve tension on the belt. Once the tension is off, you can remove the old belt and route the new belt around the pulleys according to the diagram in your owner's manual. Finally, use the tensioner pulley again to put the tension back on the new belt. Good luck!

Jack, the serpentine belt is a crucial part of your Audi 80's engine and it's important to replace it when it shows signs of wear. To start, make sure the engine is cool and locate the tensioner pulley. Use a socket wrench to release the tension and remove the old belt. When installing the new belt, make sure to follow the correct routing pattern and use the tensioner pulley to put the tension back on the belt. Hopefully this helps!