How to reset the tire pressure monitoring system on the Audi A1?

I recently purchased an Audi A1 and noticed that the tire pressure monitoring system is not functioning properly. How do I reset it so that it accurately displays the tire pressure?

Hi Samantha, to reset the tire pressure monitoring system on your Audi A1, follow these steps:
1. Turn on the ignition, but do not start the engine.
2. Press the CAR button on the MMI console, then select the MENU button.
3. Use the control button on the MMI console to select the TIRE PRESSURE option.
4. Select the RESET button and confirm the action.
Your tire pressure monitoring system should now be reset and functioning correctly.

Samantha, to reset the tire pressure monitoring system on your Audi A1, you can also try this:
1. Turn off the ignition and remove the key from the ignition switch.
2. Inflate all four tires to the recommended pressure.
3. Re-insert the key and turn on the ignition, but do not start the engine.
4. Press and hold the TPMS button (located near the hazard button) until the TPMS light on the instrument panel blinks twice.
5. Drive the vehicle for at least 10 minutes at a speed of 20mph or higher so that the system can re-calibrate.
Your TPMS should now be reset and ready to accurately display tire pressure.