How to check the brake pads on an Audi 80?

I want to ensure that my brake pads on my Audi 80 are not worn out and need replacing. What are the steps to properly inspect and evaluate the condition of the brake pads?

To check the brake pads on your Audi 80, follow these steps: 1. Park your car on a flat surface and turn off the engine. 2. Loosen the lug nuts on the wheels using a lug wrench. 3. Lift the car with a jack and properly support it with jack stands. 4. Remove the wheels and visually inspect the brake pads for any signs of wear such as thinning or cracking. 5. Measure the thickness of the pad using a caliper. A thickness of 3-5mm is acceptable, anything less may indicate the need for replacement. 6. Check for even wear on the pads and clean any debris. 7. If replacement is necessary, make sure to replace both sets of pads on an axle for optimal performance.

One way to check your brake pads on an Audi 80 is to listen for any strange noises while braking. If you hear a high-pitched squeaking or grinding sound, it may be a sign of worn out brake pads. Additionally, you can visually inspect the brake pads through the wheel spokes. If the pads look thin or show any visible signs of wear, it's time for a replacement.

To properly inspect the brake pads on your Audi 80, you will need a flashlight and a jack for lifting the car. With the wheel removed, shine the light on the brake pad through the rotor. The pad should have at least a quarter inch of padding left, anything less may indicate the need for replacement. Make sure to also check the brake fluid level and top off if necessary.