How to replace the brake pads on an Audi A6?

I just bought a used Audi A6 and I noticed that the brake pads need to be replaced. I have some experience working on cars, but I've never worked on an Audi before. Can someone provide step-by-step instructions on how to replace the brake pads on an Audi A6?

Replacing brake pads on an Audi A6 is not too difficult, but it does require some specific steps. First, gather all the necessary tools and materials including new brake pads, a jack, jack stands, a socket wrench, and brake grease. Then, loosen the lug nuts on the wheels and lift the car using the jack. Remove the wheels and locate the brake caliper. Use the socket wrench to remove the bolts holding the caliper in place. Once the caliper is removed, you can easily access the old brake pads and replace them with the new ones. Make sure to clean the caliper and apply a thin layer of brake grease before putting everything back together. Repeat the process for each wheel and don't forget to pump the brake pedal a few times before driving to ensure proper braking performance.

Replacing brake pads on an Audi A6 can be a bit intimidating, especially if you've never done it before. But don't worry, with the right tools and instructions, you can do it yourself. First, remove the wheels and locate the brake caliper. You'll need to use a special tool, called a piston compressor, to compress the caliper piston before removing the old brake pads. This allows enough space for the new brake pads to fit in. Make sure to take note of the wear indicator on the old brake pads so you know if you need to replace the rotors as well. Once the new brake pads are in place, just reverse the steps to put everything back together. If you're still unsure, don't hesitate to take your car to a professional mechanic for help.