How to manually refill brake fluid in an Audi?

I recently noticed that my Audi's brake fluid levels are low. How can I add more fluid myself? Do I need any special tools or can I use any specific type of brake fluid?

First, make sure you have the correct type of brake fluid for your Audi. You can find this information in your car's manual. Then, locate the brake fluid reservoir, which is usually located near the engine bay. Using a funnel, slowly pour the brake fluid into the reservoir. Check the fluid level frequently, so you don't overfill it. You can use a dipstick to measure the level. Make sure to clean up any spills to avoid damage to your car's paint. It's a simple process, but if you're not comfortable doing it yourself, it's best to take it to a mechanic.

Before you start, make sure the engine is cool. Open the hood and locate the brake fluid reservoir. Remove the cap and check the fluid level. If it's low, you can add more fluid. Use a turkey baster to remove some of the old fluid if it's too full. Then, place the funnel over the reservoir and slowly pour in the new fluid. Be careful not to spill any, as it can damage your car's paint. Once you've filled it to the recommended level, replace the cap. It's a simple task, but it's important to do it every few years to ensure your brakes are working properly.

First, park your Audi on a flat surface and engage the parking brake. Open the hood and locate the brake fluid reservoir. Remove the cap and check the fluid level. If it's low, you can add more fluid. Make sure to use the correct type of brake fluid as recommended in your car's manual. Slowly pour in the new fluid using a funnel, making sure not to overfill it. Once you've reached the recommended level, replace the cap. If you're unsure about performing this task yourself, it's best to take it to a mechanic.